A device that counts metal parts such as bolts and nuts at a constant rate and automatically dispenses them.
Reduction of man-hours and human error in the factory, avoiding the risk of injury to workers.
Compatible with bolts from M4 to M14.
Achievements: Adopted by automobile manufacturers and many industries and production assembly plants.
Benefits of MICE counter
- Large capacity hopper
(Reduced the number of parts supply, reduced man-hours) - Adopted a saucer type
(workers can pick up the counted parts with one hand, and the start of the next process is smooth) - Optional: Can be controlled by an external communication controller
- Simple design and low cost
Small (MINK-S)
External dimensions | 131mm(W)×254.5mm(L)×184mm(H) |
Hopper capacity | About 0.9 liters |
How to take out | Dish type (with sensor) |
Applicable parts | M4 ~ M6 bolts (with washers and flanges), nuts, washers, etc. |
Counting ability | Within 90 seconds / 15 pieces |
Main material | Housing: Stainless steel, Rotating plate: Industrial resin |
Power supply specifications | Single-phase AC100-230V can be specified |
Payout | Max 15 pieces |
Medium (MINK-M)
External dimensions | 155mm(W)×305mm(L)×256mm(H) |
Hopper capacity | About 2.5 liters |
How to take out | Dish type (with sensor) |
Applicable parts | M4 ~ M8 bolts (with washers and flanges), nuts, washers, etc. |
Counting ability | Within 90 seconds / 15 pieces |
Main material | Housing: Stainless steel, Rotating plate: Industrial resin |
Power supply specifications | Single-phase AC100-230V can be specified |
Payout | Max 15 pieces |
Large (MINK-L)
External dimensions | 204mm(W)×約461mm(L)×334mm(H) |
Hopper capacity | About 4.5 liters |
How to take out | Dish type (with sensor) |
Applicable parts | M6 ~ M12 bolts (with washers and flanges), nuts, washers, etc. |
Counting ability | Within 90 seconds / 15 pieces |
Main material | Housing: Stainless steel, Rotating plate: Industrial resin |
Power supply specifications | Single-phase AC100-230V can be specified |
Payout | Max 15 pieces |